Epoxy Resin For Creations / Jewels

Transparent low viscosity EPOXY RESIN for creations – liquid RESIN for very elaborate moulds.
LIQUIDISSIMA Epoxy resin is a two-component product based on epoxy resin and relative amine hardener.

Thanks to its special formula and the extended catalysis times, Liquidissima resin is suggested for castings at least up to 1 cm [0,39”] thickness.

Two-component epoxy system with low viscosity for film application (1 mm [0,03”]) and castings up to 3 cm [1,18”] thickness.
Its formula has been developed with the aim of reducing as much as possible the appearance of unaesthetic air bubbles, as well as to obtain 3 essential characteristics: high transparency (water-clear), low viscosity and a longer working time compared to the traditional “TRASPARENT” product.
The excellent resistance to ambient humidity guarantees a glossy and transparent surface.

The main features of this product are:

• High transparency;
• Low viscosity;
• Good chemical resistance;
• Long working time;
• Glossy and self-levelling surface.

These characteristics make the LIQUIDISSIMA Epoxy resin ideal for artistic and jewellery with particularly elaborate moulds and for all the applications in which the least possible amount of air bubbles appearing in the final product is required.
The LIQUIDISSIMA product can be coloured with any epoxy dye (both in paste and powder) in a percentage ranging from 0.1% to 2.0%.

Main features: Usage ratio 100:60 / Viscosity: very low (175-225 cps at 25 °C [77 F]) / gel time (film 1 mm at 30C) [0,03” at 86 F]: 3h00′-4h00′ / pot life (100g at 25C°) [0,22 lb at 77 F]: 45′ / Reduced-yellowing (Gardner 1) / Mechanical properties: Medium-High.