Description
Kit include:
- Art pro epoxy resin,
- Sahara black pigment
- black dye
- Holographic Silver Glitter
- IRIDESCENT GLITTER blue-green
- 99.9% Isopropyl
- Polishield gloss 100 anti-scratch paint
Transform your kitchen into an oasis of luxury with our exclusive Black Galaxy Granite Kit, enriched with sparkling glitter, for the epoxy resin worktop. This kit offers a modern and luxurious aesthetic, adding a note of sophistication to your culinary space.
Black Galaxy granite, with its sparkling diamonds, creates a striking visual effect that immediately captures attention. Combined with the durability and strength of epoxy resin, this kit ensures a surface that is robust, impact resistant and easy to maintain.
Easy to install and ensuring a professional result, our kit is perfect for renovation or DIY projects. Transform your kitchen into an elegant and functional space with our Black Galaxy Granite Epoxy Resin Worktop Kit, and let your kitchen shine with splendor and style.
Guide Instructions:
Step N1: Primer
Start by carefully measuring the amount needed to cover the surface based on the consumption of 150 g/m2, making sure to follow the proportions indicated to obtain a homogeneous mixture. Once the base has been prepared, proceed with adding the dye, choosing between white or black depending on your needs. The quantity of colourant to add to the mixture can be measured in a few drops (max 5% by volume). This step is crucial to achieve the desired colour and ensure uniformity of the application.
Before applying the primer, it is essential that the surface intended for treatment is adequately prepared. Sand the surface with a coarse grit (40 or 60) before any operation. Make sure it’s completely clean, using a soft cloth or brush to remove any pigment, dirt or debris. The surface must also be completely dry; residual humidity can compromise the adhesion of the primer and its effectiveness in sealing the surface.
Once the surface is ready, apply the mixture evenly, using a suitable tool such as a brush, roller or spatula, depending on the size of the area to be treated and your personal preference. The key is to get a thin, even layer that can cover the entire area without leaving gaps or excessive product buildup..
After application, it is essential to allow the primer to dry completely before proceeding with further treatments or finishes on the surface. The recommended waiting time is 12 hours; this range may vary slightly depending on environmental conditions, such as humidity and temperature, but offers a good compromise to ensure the mixture has time to dry and adhere properly. During this period, avoid touching or stressing the treated surface to ensure optimal results. Don’t worry if you notice any discrepancies on the surface, the next main pour will level everything perfectly.
Step N2: application
Start by applying masking tape around the perimeter of your countertop to contain the epoxy you’re about to pour. This step is essential to ensure the resin stays where it is needed. After applying the resin, wait about 1.5 hours before gently removing the tape. To ensure coverage is even and complete, plan to use approximately 1.6kg of resin for every square meter of surface area.
When you are ready to mix the resin, use a drill equipped with a paddle mixer for quick and uniform action (use at low speed), taking about 2 minutes for this operation. If you prefer to mix by hand, be prepared to take double the time. Don’t forget to scrape the sides and bottom of the container halfway through the process with a stick to ensure all the material is mixed well. For the black marble effect, add the various colourants supplied to the mixed resin mass until you obtain a homogeneous mixture.
Once the colours are correctly uniformed in the bucket, pour the coloured resin onto the surface; we are creating the marble effect in this way. To remove trapped air bubbles, gently run a propane torch or heat gun over the surface.
Wait about 15/20 minutes and, at regular intervals using a small stick (about every 10-15 minutes), create a circular or moving effect on the surface, until the resin becomes a gelatinous consistency.
It is very important that the density of the resin is correct: the Art Pro was designed for this type of application but always check that it is of the right density; In fact, environmental conditions are a detail that cannot be predicted, it is the applicator who has the situation in hand.
Once the adhesive tapes have been removed, approximately 1.5 hours after application, if there are any dry edges, moisten them slightly by wearing a protective glove to promote an even appearance. Use appropriate tools, such as spatulas or plastic scrapers, to spread and level the resin along the edges, making sure to cover the entire area well. After letting the resin cure for 24 hours, you can apply a clear top coat or PoliShield scratch-resistant paint to further protect the surface.
Remember that when you remove the tape, it is essential that the resin is partially hardened, neither too liquid nor completely solid, to avoid unwanted drips.
Reviews
Clear filtersThere are no reviews yet.