Hot
Hot
Two-Component Epoxy Adhesive in Dual Syringe
0.00 ₼
2-K Transparent Epoxy Glue – 5 Minutes
General Description:
Interior/Exterior & Universal: Perfect for a wide range of materials and surfaces, including plastic, glass, metal, wood, and more.
Working Time: 5 minutes for extremely high manual strength, with optimal final strength achieved after approximately 24 hours of curing.
Key Features:
- Easy Dosage:
- 1:1 mixing ratio.
- Utilizes a double-chamber syringe for uniform mixing.
- Product Properties:
- Heat Resistant and Waterproof: Excellent for applications requiring resilience to environmental conditions.
- BPA-Free & Transparent: Leaves no color residue and is compatible with colorants.
- Maximum Preservation: Use only the necessary amount and seal the tube to prevent curing of leftovers.
- Additional Benefits:
- Extreme Strength: High thermal and mechanical resistance.
- Oil and Chemical Resistant: Protects against wear and corrosion.
- Cures Underwater: Ideal for applications in humid or submerged environments.
- Compatible with Additives: Accepts colorants and accelerators.
- Accelerated Potlife: Limited working time of 5 minutes.
Application – Best Practices:
- Preparation:
- Ambient Temperature: 15-30°C.
- Surface Preparation: Lightly roughen the surface (sanding or shot blasting).
- Application:
- Cleaning: Surfaces must be clean, free of oil and grease.
- Application: Apply a thin layer (0.1-0.2 mm) using a piece of cardboard or plastic.
- Curing Time:
- Potlife: Approximately 5 minutes.
- Good Resistance: Achieved after 10-12 minutes.
- Total Resistance: After approximately 24 hours.
- Fixing:
- Use clamps, adhesive tape, or similar until manual strength is reached.
- Heat-Assisted Polymerization:
- Consider additional heating and cooling times.
Mixing:
- Available Methods:
- Manual: Use a toothpick or similar to mix until homogeneous.
- Static Mixing Nozzle: Ideal mixing, discard the first 2 grams.
- Dynamic Mixing Nozzle: Precise speed control, useful for industrial applications.
Curing and Resistance:
- Chemical Polymerization: Faster curing speed compared to moisture-based adhesives.
- High Resistance: Shock, vibration, and temperature resistant up to 120°C (briefly up to 200°C).
- Robustness: Excellent resistance to physical and chemical influences.
Note: For materials like PP, PE, PTFE, or silicone, a primer may be required to ensure a good bond.
Technical Data:
- Base: Epoxy resin hardener (amine mixture)
- Viscosity: High viscosity
- Color: Transparent
- Density: 1.1 g/ml
- Gap Filling Capacity: 3 mm
- Temperature Resistance: -40°C to +120°C
- Pot Life: 5 min
- Hand Resistance: 10-12 min
- Final Resistance: 24 hours
- Shore Hardness: 60
- Tensile Shear Strength: 10 N/mm²
- E Modulus: 620 N/mm²
Rated 0 out of 5
0 reviews
Rated 5 out of 5
0
Rated 4 out of 5
0
Rated 3 out of 5
0
Rated 2 out of 5
0
Rated 1 out of 5
0
Be the first to review “Two-Component Epoxy Adhesive in Dual Syringe” Cancel reply
“EPIC KIT” and “EPIC KIT XL”
Rated 0 out of 5
0.00 ₼
Select options
This product has multiple variants. The options may be chosen on the product page
“HEAT PRO” FLEXIBLE HEAT-RESISTANT ANTI-SCRATCH GLOSSY COATING
Rated 0 out of 5
0.00 ₼
Select options
This product has multiple variants. The options may be chosen on the product page
“Iwhite” White Polyurethane Casting Resin
Rated 0 out of 5
0.00 ₼
Select options
This product has multiple variants. The options may be chosen on the product page
Reviews
Clear filtersThere are no reviews yet.